i. maintenance of coating production line:
1. synchronous repair method: during reproduction, if the fault is found, try not to repair, adopt maintenance method. keep the line running. by sunday, focus on repair and finishing.
2. partial repair method: if there is a big problem in the coating production line, the repair time is relatively frequent, and the synchronous repair method cannot be used, then the maintenance workers will repair a certain part. wait until sunday to repair the other part. ensure that the coating line does not stop production during working hours. in addition, in the management of the use of pre - repair method. install the timer in the equipment, record the working time of the equipment, apply the wear law, to predict the wear of vulnerable parts, replace vulnerable parts in advance, can eliminate the fault before, ensure the production line full load production.
ii. maintenance knowledge of coating production line:
1. electric circuit, gas circuit, oil circuit and mechanical transmission parts (such as guide rail, etc.) shall be inspected and cleaned before and after the shift.
2. the working process shall be inspected in rounds, the key parts shall be sampled, the abnormal shall be recorded, the minor problems shall be dealt with before and after the shift (the time is not long), and the major problems shall be prepared with accessories.
3. shut down the whole line for maintenance, make wear parts plan, replace wear parts in advance, prevent fire.
this article is provided by the company foshan gaosheng machinery co., ltd.(https://www.fsgsjx.com). the views of this article does not represent the views of this site.
back to home