first check. check whether there is a tool on the conveyor belt of the roller coating machine, whether there is a piece of cloth and other foreign matters between the steel rod and the cots and arrange them, but also check whether the gas pipe of the oil pump is connected, whether the power indicator is on, whether the uv paint is heated to 35°-50° and other questions.
then the amount. use vernier caliper to measure the thickness of the plate to adjust the height. then swing the lifting handle by hand to adjust the height of the roller. when adjusting the double-stick roller coating machine, be sure to adjust the height of the two groups of rollers.
next, come on. turn over the oil pump switch and add the paint between the steel rod and the cots until the paint runs to the ends of the two rollers.
and then start. turn over the cots switch and then turn over the steel bar switch, in order to get a relatively flat layer of fine lines, the rotation speed of the steel bar must be slower than the cots, turn over the transport tube, the transport speed and the speed of the cots line to the same, one side of the paint pile up the phenomenon.
the end result is production. timely cleaning after delivery.
back to home