roll coating machine manufacturer tells you the small tips of wood coating
announcer:高晟机械 release time:2019-11-4 15:41:19
as far as wood lacquer is concerned, in order to let coating play professional performance, need correct construction method. so how do you get good results? small make up to introduce a few tips.
first, dust, first of all the surface of the wood polished smooth, treatment of floating ash, treatment, you can use a special dust cloth, such as the floor can be repeatedly treated with a vacuum cleaner.
second, because material and different, understand the woodiness of lumber above all, if the thing is hard lumber, if teak should be used carefully be like be putty, bubble force water to wait to make a bottom to avoid to cause change color and affect adhesion hard lumber, besmear paint directly can get the best result that wants. if need to fill gap, can use paint to add fine wood powder to fill evenly. if common lumber, if need to be treated with transparent be bored with child to do base material, be about to use scraper to spread evenly to scrape whole base course first, appropriate is thin should not thick. after drying, polish evenly and thoroughly polish off the excess transparent putty attached to the wood surface, so as not to cause seven diseases.
four, coating grasp, dedusting paint should be thin should not be thick, thin layer multichannel, in the multilayer coating construction, each brush should wait for the next layer to dry construction, and every time the need to polish.
five, appropriate temperature, when the temperature in 5 degrees, will prolong the drying time, when the temperature is too low will produce white fog or extinction phenomenon, so should avoid direct sunlight or high temperature under the construction operation, too high temperature coating drying time is faster, will produce pinhole or bubble, so should avoid operating under high temperature.
this article is provided by the company foshan gaosheng machinery co., ltd.(https://www.fsgsjx.com). the views of this article does not represent the views of this site.
first, dust, first of all the surface of the wood polished smooth, treatment of floating ash, treatment, you can use a special dust cloth, such as the floor can be repeatedly treated with a vacuum cleaner.
second, because material and different, understand the woodiness of lumber above all, if the thing is hard lumber, if teak should be used carefully be like be putty, bubble force water to wait to make a bottom to avoid to cause change color and affect adhesion hard lumber, besmear paint directly can get the best result that wants. if need to fill gap, can use paint to add fine wood powder to fill evenly. if common lumber, if need to be treated with transparent be bored with child to do base material, be about to use scraper to spread evenly to scrape whole base course first, appropriate is thin should not thick. after drying, polish evenly and thoroughly polish off the excess transparent putty attached to the wood surface, so as not to cause seven diseases.
four, coating grasp, dedusting paint should be thin should not be thick, thin layer multichannel, in the multilayer coating construction, each brush should wait for the next layer to dry construction, and every time the need to polish.
five, appropriate temperature, when the temperature in 5 degrees, will prolong the drying time, when the temperature is too low will produce white fog or extinction phenomenon, so should avoid direct sunlight or high temperature under the construction operation, too high temperature coating drying time is faster, will produce pinhole or bubble, so should avoid operating under high temperature.
this article is provided by the company foshan gaosheng machinery co., ltd.(https://www.fsgsjx.com). the views of this article does not represent the views of this site.
related news
- [2019.07.18]
- [2019.09.11]
- [2019.05.10]
- [2019.08.13]
- [2019.06.27]
- [2019.12.11]
- [2019.09.10]
- [2019.12.10]
- [2019.07.17]
- [2019.12.07]
- [2019.09.09]
- [2019.12.06]
- [2019.08.12]
- [2019.12.05]
- [2019.09.07]
- [2019.12.04]
- [2019.11.02]
- [2019.07.16]
- [2019.12.03]
- [2019.05.10]