详解滚涂机常规操作步骤-捕鱼网站

15yearquality

focus on overall solutions for painting equipment

your position:home > industry information

explain the general operation steps of the roller coating machine

announcer:高晟机械   release time:2019-12-6 17:15:33

roller coating machine is mainly used for paint roller coating of panel furniture, cabinet door panels, flat doors, metal plates, etc. roller coating machine can replace traditional spraying, saving time, labor and environmental protection. compared with spraying, it can save paint by 48.8%.
 
1. check: check whether there are tools on the roller coating machine belt, and whether there are foreign objects such as rags between the steel roller and the rubber roller, and clean them up; check whether the air pipe of the oil pump is connected, the power indicator light is on; whether the paint is heated to 35 ° -50 °.
 
2. amount: use a vernier caliper to measure the thickness of the flat workpiece and note it down.
 roller coating machine
3. height adjustment: shake the lifting handle by hand to adjust the height of the roller. when adjusting the double stick roller coating machine, be sure to adjust the height of the two sets of rollers.
 
4. height inspection: place the flat workpiece under the roller, then adjust the height of the roller until the flat workpiece just touches the roller; take out the flat workpiece, and then rotate the lifting handwheel to lower it by 2-3 turns.
 
5. reliance: rotate and adjust the steel wheel gap handle until there is no gap between the steel wheel and the rubber roller, and then rotate the handle 2-3 turns to tighten the steel wheel and rubber roller.
 
6. refueling: turn on the oil pump switch and add the paint between the steel roller and the rubber roller until the paint reaches the ends of the two rollers.
 
7. startup: turn on the rubber roller switch and then turn on the steel roller switch. in order to obtain a smooth and fine-grained coating, the rotation speed of the steel roller is slower than that of the rubber roller. be consistent, so as to avoid the phenomenon of paint piles and tails.
 
8. production: place the flat workpiece on the conveyor belt and adjust accordingly according to the effect of roller coating.
 
9. cleaning: turn off the paint switch on the oil pump, clean the paint on the steel roller and rubber roller with the matching cleaning agent, and separate the steel roller and rubber roller until there is a gap between the two rollers.
 
10. shut down: turn off the power switch, turn off the air pipe switch, turn off the paint heating bucket switch
the article is provided by: roller coating machine https://www.fsgsjx.com foshan nanhai gaosheng machinery co., ltd. provides the finishing touches.

previous: next:

back to home
related news
  • [2019.10.31]
  • [2019.12.05]
  • [2019.09.04]
  • [2019.08.06]
  • [2019.12.04]
  • [2019.10.30]
  • [2019.12.03]
  • [2019.09.03]
  • [2019.07.10]
  • [2019.12.02]
  • [2019.10.29]
  • [2019.11.30]
  • [2019.09.02]
  • [2019.08.05]
  • [2019.07.02]
  • [2019.11.29]
  • [2019.10.28]
  • [2019.11.26]
  • [2019.08.31]
  • [2019.07.09]
menu
home
about
product
case
video
news
contact
contact

foshan gaosheng machinery co., ltd.

add:  no. 5 xiongxing dongyuan industrial zone, hecun, lishui town, nanhai district, foshan, guangdong fax:  0757-85637852 e-mail:  gs@fsgsjx.com

© 捕鱼网站 copyright 2019 all rights reserved  "));    technology:  

 

—