滚涂机涂装表面纹理粗怎么办?-捕鱼网站

15yearquality

focus on overall solutions for painting equipment

your position:home > industry information

14/5000 roller coating machine coating surface texture rough how to do?

announcer:高晟机械   release time:2019-9-9 15:08:44

   coating machine coating plate surface texture is very thick by the paint is too thick, coating wheel damage, steel wheel and coating wheel spacing is too big, steel wheel speed is too fast and other four reasons, the following for the four types of rolling coating machine fault solutions.

one, paint is too thick too thick: the temperature that may be the environment is too low, paint add temperature bucket temperature should be in 35°-50° between, adjust thin paint.
damage or scratch to the coating wheel of the door roller coating machine: repair or replace the coating wheel.
three, the gap between the steel wheel and the coating wheel is too big: tighten the gap between the steel wheel and the coating wheel, but not too tight.

滚涂机

four, door plate roller coating machine steel wheel speed is too fast: adjust the button on the control panel, reduce the speed of the steel wheel.


this article is provided by the company foshan gaosheng machinery co., ltd.(https://www.fsgsjx.com). the views of this article does not represent the views of this site.


previous: next:

back to home
related news
  • [2019.07.23]
  • [2019.09.18]
  • [2019.07.02]
  • [2019.09.17]
  • [2019.05.10]
  • [2019.07.22]
  • [2019.09.16]
  • [2019.05.10]
  • [2019.09.12]
  • [2019.07.20]
  • [2019.09.11]
  • [2019.05.10]
  • [2019.07.01]
  • [2019.09.10]
  • [2019.07.19]
  • [2019.08.14]
  • [2019.11.04]
  • [2019.09.07]
  • [2019.11.02]
  • [2019.07.18]
menu
home
about
product
case
video
news
contact
contact

foshan gaosheng machinery co., ltd.

add:  no. 5 xiongxing dongyuan industrial zone, hecun, lishui town, nanhai district, foshan, guangdong fax:  0757-85637852 e-mail:  gs@fsgsjx.com

© 捕鱼网站 copyright 2019 all rights reserved  "));    technology:  

 

—